Florabest FGS 72 A1 - Manual (Page 23)

23
GB MT
Technical data
Unit
Motor voltage ............................ 7.2 V
Rated speed .......................... 1100 min -1
Protection class ................................... III
Protection category...........................IPX0
Grass-trimming blade
Cutting width ............................93 mm
Shrub-trimming blade
Cutting length ........................120 mm
Distance between teeth ....approx. 8 mm
Weight (incl. accessories) .............. 1.6 kg
Sound pressure level
(L
pA
) ............... 59.1 dB(A), K
pA
=3 dB(A)
Sound power level (L
wA
)
guaranteed ...........................86 dB(A)
measured ....... 79.1 dB(A); K
wA
=3 dB(A)
Vibration (a
n
)
at handle .........1.39 m/s 2 , K=1.5 m/s 2
Battery (Li-Ion)
Nominal voltage ......... 7.2 V 1.3 Ah
Loading time .................. approx. 3-5 h
Charger ................. BHY410900400GS
Voltage input ....... 230-240 V~, 50-60 Hz
Nominal consumption .................... 16 W
Voltage output ..................................9 V
Recharging current ..................... 400 mA
Performance output.......................3.6 VA
Protection class ............................... II
Protection category...........................IPX0
The noise and vibration levels have been
calculated according to the norms stated
in the conformity statement. Technical and
optical alterations to serve progress may
be made without notice. All measurements,
instructions and other data given in this
manual are therefore given without guar-
antee of correctness. Legal claims made
on the basis of this manual are therefore
excluded.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.Safety precau-
tions aimed at protecting the user
should be based on estimated expo-
sure under actual usage conditions
(all parts of the operating cycle are
to be considered, including, for ex-
ample, times during which the power
tool is turned off and times when the
tool is turned on but is running idle).
Safety Instructions
This unit can cause serious in-
jury if not used correctly. Be-
fore using the unit, carefully
read through the instruction
manual and familiarise your-
self with all of its controls.
Symbols
Symbols in the manual
Warning symbols (instead of
the exclamation mark, the
danger may be explained)
with information on damage
and injury prevention.
Instruction symbols (the instruction
may be explained at the place of the
exclamation mark) with information
on preventing damage.