Enterasys Networks Enterasys Gold Distributed Forwarding Engine 4H4285-49 - Manual (Page 87)

PoE Port Status LEDs
Matrix DFE-Gold Series PoE Module Hardware Installation Guide C-3
PoE Port Status LEDs
The PoE port status of each 10/100 Mbps front‐panel port is indicated by the two‐color RX
and TX LED display for each port. To observe the PoE port status indications, you must
switch the DFE module management system from the default RX/ TX Status Mode to the
PoE Port Status Mode using the DFE module front‐panel GROUP SELECT button. The
switch operation and a description of how to use the LED indications are described in
“
Using LANVIEW ” on page 4‐1.
Table C‐2 provides a brief description of each port status RX/TX LED display.
Table C-2 PoE Status LED Indications
PoE Port Status RX LED TX LED
Port is powered on GREEN OFF
Port is off due to overload OFF RED
Port is off due to power management RED OFF
Port is off for other reason OFF OFF