Enterasys Networks Enterasys Gold Distributed Forwarding Engine 4H4285-49 - Manual (Page 29)

Matrix DFE-Gold Series PoE Module 4H4285-49 Installation Guide 3-1
3
Installation
This chapter provides the instructions to install the 4H4285‐49 DFE module and an
optional network expansion module. Follow the order of the sections listed below to
correctly install the DFE module.
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.
Important Notice
Read the Release Notes shipped with the DFE module to check for any exceptions to the supported
features and operation documented in this guide.
For information about... Refer to page...
Installation Site Requirement 3-2
Unpacking the DFE Module 3-2
Installing Optional Network Expansion Module (NEM) 3-3
DFE Module Placement and Installation Rules 3-3
Installing 4H4285-49 into a Matrix E7 or N7 Chassis 3-7
Installing 4H4285-49 into Matrix N3 or N5 Chassis 3-10
Connecting 48 Vdc Power for PoE Operation 3-12
Connecting to COM Port for Local Management 3-18
Completing the Installation 3-24