Cleaning, maintenance and storage – Florabest FRM 1200 B3 User Manual
Page 49
49
GB
60.mm.-.Tall.cutting.height
40.mm.-.Medium.cutting.height
20.mm.-.Short.cutting.height
.1.. Unscrew.the.wheels.(5).
.
2.. Screw.the.wheels.(5).back.on.in.
the.desired.position.
The.correct.height.is.around.25.–.40.mm.
for.a.decorative.lawn.and.around.30.–.60.
mm.for.a.used.lawn.
. A.higher.cut.height.should.be.se-
A.higher.cut.height.should.be.se-
lected.for.the.first.cut.of.the.season.
. Observe.the.noise.protection.and.
local.regulations..
Switching On and Off
.1.. Insert.the.power.cable.plug.into.
the.socket.(
A
9).on.the.curved.
handle.(
A
1).
.
2.. To.relieve.the.strain,.form.a.loop.
with.the.end.of.the.power.cable.
and.hang.this.into.the.strain.reli-
ef.(11)..See.the.diagram.
.
.
3.. Connect.the.equipment.to.the.
power.supply.
.
4.. Before.switching.on,.ensure.that.
the.equipment.is.not.in.contact.
with.any.objects.
.
5.. To.switch.on,.press.the.release.
button.(10).on.the.handle.at.the.
same.time.as.pressing.the.start.
lever.(12)..Release.the.release.
button.(10)..
.
6.. To.switch.off,.release.the.start.
lever.(12)..
. After.switching.off.the.equipment,.
the.blade.continues.to.turn.for.sev-
eral.seconds..Do.not.touch.the.mov-
ing.blade..There.is.a.risk.of.injury.
Working with the
Lawnmower
Regular.mowing.encourages.increased.foli-
ation.of.the.grass.and.kills.off.weeds.at.the.
same.time..Therefore,.not.only.does.each.
mowing.increase.the.density.of.the.lawn,.it.
also.produces.an.evenly.resilient.lawn.
The.first.cut.is.to.be.made.in.around.April,.
at.a.growth.height.of.70.–.80.mm..In.the.
main.vegetation.period,.the.lawn.is.to.be.
mowed.at.least.once.a.week..
•. Start.mowing.near.the.socket.and.work.
away.from.the.socket.
•. Always.keep.the.extension.cable.be-
hind.you.and.when.you.turn,.move.it.to.
the.side.that.has.already.been.mowed.
•. Run.the.equipment.at.a.walking.pace,.
in.tracks.that.are.as.even.as.possible..
For.gap-free.mowing,.the.tracks.should.
always.overlap.by.a.few.centimetres..
•. Adjust.the.cut.height.so.the.equipment.
is.not.overloaded..Otherwise,.the.mo-
tor.may.be.damaged.
•. On.slopes,.always.work.across.the.
slope..Take.particular.care.when.going.
backwards.and.pulling.the.equipment.
•. Clean.the.equipment.after.each.use,.as.
described.in.the.chapter.on.“Cleaning,.
Maintenance.and.Storage”.
. Switch.off.the.equipment.after.
work.and.in.order.to.transport.it,.
disconnect.the.plug.and.wait.until.
the.blade.stops..There.is.a.risk.of.
injury.
Cleaning,
Maintenance and
Storage
. Have.work.that.is.not.described.
in.these.instructions.carried.out.by.
a.customer.service.centre.that.we.
have.authorised..Use.only.original.
parts..