Florabest FRM 1200 B3 - Manual (Page 47)

47
GB
modified.without.the.authorisation.of.the.
manufacturer..Do.not.use.the.equipment.
with.damaged.safety.devices.or.screens.
or.with.missing.safety.equipment.such.
as.deflection.and/or.grass.collection.de-
vices.
•. Do.not.overload.the.equipment..Work.
only.within.the.specified.power.range.
and.do.not.change.the.regulator.set-
tings.on.the.motor..Do.not.use.low-
powered.machines.for.heavy.work..Do.
not.use.your.equipment.for.purposes.
other.than.those.for.which.it.is.de-
signed.
•. Do.not.use.the.equipment.near.
inflammable.liquids.or.gases..Non-
observance.will.result.in.a.risk.of.fire.
or.explosion.
•. Do.not.lift.or.carry.the.equipment.when.
the.motor.is.running.
•. Switch.off.the.equipment.and.discon-
nect.the.plug:.
-.Whenever.you.leave.the.machine,.
-.Before.cleaning.the.. ejection.hole.or.
removing.blockages,.
-.When.the.equipment.is.out.of.use,.
-.Before.checking,.cleaning.or.work-
ing.on.the.equipment,
-.If.the.power.cable.is.damaged.or.
frayed,
-.If.the.equipment.has.hit.a.foreign.
object.or.if.strange.vibrations.occur.
during.work..In.this.case,.check.the.
equipment.for.damage.and.have.it.
repaired.if.applicable.
•. Do.not.place.feet.or.hands.near.or.un-
der.rotating.parts..Do.not.stand.in.front.
of.the.grass.ejection.hole.during.sickle.
mowing.
Maintenance.and.Storage:
•. Ensure.that.all.nuts,.bolts.and.screws.
are.tightened.firmly.and.the.equipment.
is.in.safe.working.condition.
•. Do.not.attempt.to.repair.the.equipment.
yourself.unless.you.have.been.trained.
to.do.so..Any.work.not.specified.in.
these.instructions.is.to.be.carried.out.
only.by.customer.service.centres.that.
we.have.authorised..
•. Keep.the.equipment.in.a.dry.location.
and.out.of.reach.of.children.
•. Handle.the.equipment.with.care..Keep.
tools.sharp.and.clean,.in.order.to.fa-
cilitate.better.and.safer.work..Follow.
the.maintenance.instructions.
•. Wear.protective.gloves.when.changing.
the.cutting.device.
•. Regularly.check.the.grass.collection.
device.for.wear.and.strains..For.safety.
reasons,.replace.worn.or.damaged.
parts..When.adjusting.the.blades,.take.
particular.care.to.avoid.fingers.being.
trapped.between.the.rotating.blades.
and.fixed.parts.of.the.machine.
•. Check.that.only.replacement.tools.au-
thorised.by.the.manufacturer.are.used.
Electrical.Safety:
•. Ensure.that.the.mains.voltage.matches.
the.specifications.on.the.rating.plate.
•. If.possible,.connect.the.equipment.only.
to.a.socked.with.a.residual.current-
operated.protective.device.(RCD).with.a.
release.current.of.more.than.30.mA.
•. Avoid.bodily.contact.with.earthed.
parts.(e.g..metal.fences,.metal.posts).
•. Use.only.authorised.power.cables.of.
type.H05VV-F.or.H05RN-F,.which.are.
no.more.than.75.m.long.and.suitable.
for.outdoor.use..The.power.cable.wire.
cross.section.must.be.at.least.2.5.mm 2 ..
Always.completely.unroll.cable.drums.
before.use..Check.the.cable.for.dam-
age.
•. To.fix.on.the.power.cable,.use.the.
cable.suspension.intended.for.the.pur-
pose.
•. Keep.the.power.cable.away.from.the.
cutting.tool.when.working..The.cutting.
blades.may.damage.the.power.cable.
and.result.in.contact.with.live.parts..Al-
ways.run.the.power.cable.behind.the.
operator.
•. Do.not.use.the.power.cable.to.pull.the.
plug.from.the.socket..Protect.the.power.