P.46 – Epson EB 1735W User Manual
Page 46
List of Functions
46
Operation
Direct Power On: You can set whether or not (On/Off) to enable Direct Power On.
When it is set to "On" and the projector power cable is connected to an electrical outlet, be aware that sudden surges of electricity when power
comes back on after a power outage may cause the projector to turn on automatically.
Sleep Mode: When set to "On", this automatically stops projection when no image signal is being input and no operations are carried out.
Sleep Mode Timer: When Sleep Mode is set to "On", you can set the time before the projector automatically turns off within a range of 1 to 30
minutes.
Lens Cover Timer: When set to "On", this turns off the power automatically 30 minutes after the lens cover is closed. Lens Cover Timer is set to
"On" at the time of purchase.
High Altitude Mode: Set to "On" when using the projector above an altitude of 1500 m.
Standby mode
(EB-1735W/1725
only)
You can use network monitoring and control functions while the projector is in standby mode when this is set to "Network On".
You can use SNMP
g
to monitor and control the status of the projector over the network, or by using the "EMP Monitor" software supplied with
this product.
USB Type B
(EB-1735W/1725
only)
Set to "USB Display" when the projector and a computer are connected by a USB cable and computer images are projected.
s
Quick Start Guide
Set to "Link 21L" when the mouse pointer is to be operated by the remote control. s
Link 21L
Set "USB Type B" to "Link 21L". When set to "On", you can use the Link 21L utility software.
Projector ID
Set the ID within a range of "1" to "9". "Off" indicates that no ID is set. s
Multi-screen
You can adjust the hue and brightness of each projected image when multiple projectors are lined up and projecting. s
Adjustment Level: You can adjust from black to white in five stages called levels 1 to 5, and in each of these 5 levels you can adjust "Brightness
Correct." and "Color Correct".
Brightness Correct.: Corrects the difference in the brightness of each product.
Color Correct. (G/R) / Color Correct. (B/Y): You can correct the difference in the color of each product.
Language
You can set the language for message displays.
Reset
You can reset "Display
*1
" and "Operation
*2
" from the "Extended" menu to their default settings.
To return all menu items to their default settings, see s
*1 When "User's Logo Protect" is set to "On" in "Password Protect", settings relating to user's logo cannot be changed. You can make changes after setting "User's
Logo Protect" to "Off". s
*2 Except for "High Altitude Mode".
Sub Menu
Function