Epson 9000 - Manual (Page 31)

2
Setting up the Printer with Your Macintosh 2-7
Start.bk
Rev. C
A5 size CHAP2.FM
1/27/99 Pass 0
R Proof Sign-off:
Miyazaki
_______
Yamanouchi _______
Jacqueline _______
Using the Chooser to select your printer
After you install the printer software, you need to open the
Chooser to select your printer. You have to choose the printer only
the first time you use it or after you have chosen another printer.
Your Macintosh will always print using the last printer selected.
If you are using the serial interface, choose your printer driver as
described in the following section, “Using the serial interface”. If
your system is connected to an AppleTalk network, see “Using
an AppleTalk network” on page 2-8.
Using the serial interface
Follow the steps below to use the serial interface to send print jobs
directly to the printer:
1. Make sure the printer is connected to your Macintosh and is
turned on.
2. Select Chooser from the Apple menu. Then click the SPro
9000 icon and the port your printer is connected to.