Epson 9000 - Manual (Page 18)

1-6 Setting up the Printer with Your PC
Start.bk
Rev. C
A5 size CHAP1.FM
1/27/99 Pass 0
L Proof Sign-off:
Miyazaki
_______
Yamanouchi _______
Jacqueline _______
Printing on a Peer-to-Peer Network
For Windows 95 and 98, see below. For Windows NT 4.0, see “For
Windows NT 4.0” on page 1-10.
For Windows 95 and 98
This section tells you how to set up your printer so that other
computers on a network can use it.
First, you need to set up the printer as a shared printer on the
computer to which the printer is connected. Then, you must
signify the network path to the printer from each computer to use
the printer, and install the printer software on those computers.
Note:
This section describes how to use your printer as a shared printer on a
network. To connect your printer directly to a network without setting
it up as a shared printer, consult your network administrator.
Setting up your printer as a shared printer
Follow these steps to share a printer connected directly to your
computer with other computers on a network:
1. Click Start, point to Settings, then click Control Panel.
2. Double-click Network.