Emerson Radio iC172 - Manual (Page 11)

1 1
Adjusting The Wake Up Times
Your SmartSet ® clock radio has two separate alarms that can be set and used
independently. You may use the alarms to wake two people at different times, or
you may use one alarm for weekdays and the other for weekend wake up times.
The procedure for adjusting the wake-up time is the same for both Alarms.
1.) Depress and hold either the ALARM 1 or
ALARM 2 setting button. The display will
change from the correct time to the Alarm 1
or Alarm 2 wake up time.
2.) While holding the ALARM 1 or ALARM 2 setting button, press the H button
to advance the hour display. Each press of the H button advances the
display by one hour. If you continue to hold the button the hour display will
advance rapidly. The hour display only moves in the forward direction
While holding the ALARM 1 or ALARM 2 setting button, press the M button
to advance the minutes display. Each press of the M button advances the
display by one minute. If you continue to hold the button the Minute display
will advance rapidly. The Minute display only moves in the forward direction
3.) When the desired wake up time appears on the display, release the H or
M buttons.
Note: Be sure that you have set the wake up time correctly by observing
the AM indicator. If the AM indicator is ‘On’ the wake up time is “AM”. If
the AM indicator is ‘Off’, the wake up time is “PM”.
4.) When the desired wake up time (AM or PM) appears on the display, release
the ALARM 1 or ALARM 2 setting buttons.
Selecting The Alarm Mode
Your SmartSet ® clock radio allows you to select from among three different alarm
operation modes for either alarm. The alarm modes are:
• Everyday – the alarm will turn on all 7 days.
• Weekdays only – the alarm will only turn on Monday through Friday;
• Weekends only – the alarm will only turn on Saturday and Sunday;
iC172 IB 301207new3.p65 26/3/2008, 11:11 11