Epson 5350 EN - Manual (Page 40)

1 • Setting Up the Projector 32
Note: If your laptop uses a serial mouse, perform steps 2 and 3 using
the PC serial mouse cable instead of the PS/2 or USB cable (not
shown in the illustration.)
4. To use the ELP Link IV software or to use the Effects buttons on
the remote control, connect one end of the serial cable to the
SERIAL terminal on the square end of the main cable.
5. Connect the other end of the serial cable to the serial port on the
back of your computer.
Note: You will not be able to use ELP Link IV software if your laptop
has only one serial port that is being used to support a serial mouse.
6. Configure your laptop to work with an external mouse.
Note: You may have to set the display to appear on both the laptop’s
screen and the projector. Some laptops let you change this setting with
the keyboard’s function keys or by using a setup utility provided by the
computer manufacturer. Check your laptop’s manual or online help
for instructions.