Epson 5350 EN - Manual (Page 24)

1 • Setting Up the Projector 16
❐ Macintosh serial cable
❐ Projector Software CD ROM
You will not need all these components; your configuration will
determine which ones you need.
Save all packaging in case you need to ship the projector in the future.
Always transport the projector in its original packaging (or the
equivalent), or use a carrying case if you are carrying the projector by
hand. (See page 141 for instructions.)
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
❐ To receive an S-Video signal, you need an S-Video cable. (One is
usually provided with your video device.) A separate cable is
required for each video source.
❐ To connect a second computer, you need a computer video and
audio cable.