Epson 5350 EN - Manual (Page 147)

Replacing the Lamp 139
1. Turn off the projector and unplug the power cable.
2. Turn the projector over so you can access the lamp cover.
3. Use a screwdriver, coin, or similar object to loosen the two
retaining screws on the lamp cover. When the screws are loose, lift
off the lamp cover. (You cannot remove these screws from the
cover.
)
4. Use a screwdriver, coin, or similar object to loosen the two screws
holding the lamp unit in place. (You cannot remove these screws.)
2
1