Important safety information, Setup of the heart rate monitor – Crivit 1-LD3473 User Manual
Page 4

- 5 -
•
Second time zone
Other
•
Back light
Important safety information
ATTENTION:
Consult your doctor before you begin any
training program. Your doctor can help you choose the 
proper training intensity and heart rate guidelines for your 
exercises. 
This heart rate wrist watch is not a medical device and 
should only be used as a guide for your training. 
 
- Batteries 
Insert the batteries/ rechargeable batteries in the correct polarity. Don’t try to 
recharge non-rechargeable batteries and under no circumstances throw them into 
fire. Danger of explosion. 
Do not use unequal batteries (old and new, Alkaline and carbon, etc.) 
simultaneously. If you will not use the device for a long time, remove the batteries 
and store the device in a dry and dust-free place. Improper use of batteries may 
cause an explosion or leakage. If the batteries have leaked, use gloves and clean 
the appliance thoroughly with a dry cloth. 
 
- Electrical devices should not be in the hands of children 
Never let children use electrical devices unsupervised. Children can’t always 
recognize the possible dangers properly. Batteries/ rechargeable batteries can 
be life threatening when swallowed. Store the batteries where they cannot be 
reached by small children. If a battery is swallowed, medical aid must be sought 
immediately. 
Also keep the packaging foils away from children. Danger of suffocation. 
 
- 6 -
Setup of the heart rate monitor
Use a coin to unscrew the battery cover on the back side of the chest belt and 
insert the 3V battery with the (+) sign facing up. Screw the battery compartment 
cover back into the case. 
 
 
Remove the protective film from the display and press MODE, SEL or SET. 
 
Now select English, German, French or Spanish language by pressing SEL and 
confirm your setting by pressing SET. 
 
Select the unit KM-KG 
METRIC
KM - KG
KM - KG
KM - KG
or Miles/pounds
IMPERIAL
M - LB
M - LB
M - LB
in the same way. Complete the setting procedure by pressing MODE. 
The watch can be reset by pressing and holding SET and SEL together. Only after 
reseting the watch the other language can be selected. 
 
battery CR2032
