Kichler 380108 User Manual
Page 4
3
Step 1. Install three (3) 40 watt lamps (included).
One in each of the light kit sockets. (Fig. 3)
Step 2. Place the center hole in the glass shade
onto the threaded pipe from the light kit.
While holding the glass shade, place the rubber
washer, flat washer onto the threaded pipe and
then thread the retaining nut onto the pipe.
Finally, place the Decor Cover on the threaded
pipe and thread the Finial on securely.
Step 3. Restore power only after installation is
completed.
Light Kit
Bulb
Glass
Rubber Washer
Flat Washer
Scew nut
De’
cor Cap
Finial
See also other documents in the category Kichler Lighting:
- 49472 (2 pages)
- 49218 (2 pages)
- 49448 (2 pages)
- 49448 (2 pages)
- 11008 (1 page)
- 9360 (1 page)
- 9549 (1 page)
- 9568 (2 pages)
- 9817 (1 page)
- 11251 (1 page)
- 2019 (1 page)
- 42156 (2 pages)
- 2217 (2 pages)
- 15384 (2 pages)
- 15395 (2 pages)
- 15395 (2 pages)
- 15395 (2 pages)
- 15449 (2 pages)
- 16030 (2 pages)
- 15426 (2 pages)
- 15449 (2 pages)
- 15449 (2 pages)
- 15421 (2 pages)
- 15449 (2 pages)
- 15449 (2 pages)
- 15421 (2 pages)
- 15449 (2 pages)
- 15449 (2 pages)
- 15449 (2 pages)
- 15421 (2 pages)
- 15449 (2 pages)
- 15449 (2 pages)
- 16030 (2 pages)
- 15426 (2 pages)
- 15266 (1 page)
- 2101 (2 pages)
- 1675 (2 pages)
- 15087 (2 pages)
- 15276 (1 page)
- 1748 (1 page)
- 2086 (1 page)
- 15323 (2 pages)
- 15361 (2 pages)
- 15079 (1 page)
- 2313 (2 pages)