beautypg.com

Set the advanced driver, P. 69 – Edirol PC-50 User Manual

Page 69

background image

69

System settings

Use the

ADVANCED DRIVER Switch

(p. 11) to switch ADVANCED DRIVER ON / OFF.

Normally, we recommend that you use

ON

.

On Mac OS X, you can also use this with the ADVANCED DRIVER OFF setting.

*

FPT = Fast Processing Technology for MIDI Transmission:

Effective use is made of the USB bandwidth according to the amount of MIDI data to be transmitted,
ensuring that MIDI data processing will always occur optimally.

In order for the setting of the ADVANCED DRIVER switch to take effect, you must exit all
sequencer software and other softwares that use the PC-50, and turn the PC-50’s power off,
then switch it on again.

Set the ADVANCED DRIVER

ON

This is the operating mode when the ADVANCED DRIVER switch is ON.

*FPT

technology is used to perform high-speed MIDI transfer.

Normally, we recommend that you use this mode.

OFF

This is the operating mode when the ADVANCED DRIVER switch is OFF.
Select this if you are using the standard MIDI driver provided by your operating system.
On Mac OS X, you can also use this with the ADVANCED DRIVER OFF setting.

PC-50_e.book 69 ページ 2005年11月10日 木曜日 午前10時33分