Edirol PC-50 - Manual (Page 25)

25
Getting Connected and Installing Drivers (Windows)
Make the following settings so that you can use the MIDI functionality of the
PC-50. For details on connections, refer to
“Basic connections and MIDI
flow” (p. 38).
1
Open Control Panel .
Click the Windows Start menu, and from the menu that appears, select
Settings | Control Panel .
2
Open the Sounds and Multimedia Properties .
In Control Panel , double-click the Sounds and Multimedia icon to open the
Sounds and Multimedia Properties dialog box.
3
Click the AUDIO tab.
fig.2K-E
4
For MIDI music playback , click the
▼
located at the right of [Preferred
device] , and select the MIDI device
from the list that appears.
If you want to use Media Player to play
a sound module connected to the PC-
50’s MIDI OUT connector, select
EDIROL PC-50 MIDI OUT .
5
Close the Sounds and Multimedia Properties dialog box.
Click [OK] to complete the settings.
Windows 2000 / Me users
If the Sound and
Multimedia
icon is not
displayed, click “Show all
control panel options”
in
the frame at the left.
Select the appropriate
MIDI device for your
system. You do not
necessarily have to select
EDIROL PC-50 MIDI OUT
.
For details on the PC-50’s
output devices, refer to
“Input / output devices”
(p. 36).
This completes settings for using the PC-50 with an software that uses the standard Windows device
settings, such as Media Player.
For details on how to make these settings, refer to the owner’s manual for your software.
For details on the PC-50’s output devices, refer to “Input / output devices” (p. 36).
PC-50_e.book 25 ページ ２００５年１１月１０日 木曜日 午前１０時３３分