Edirol PC-50 - Manual (Page 33)

33
Getting Connected and Installing Drivers (Macintosh)
fig.3-8_35
8
Choose “Open” from the File menu.
From the OMS Setting folder that you
copied in step 4 , select the PC-50 file,
and click [Open] .
A screen like the one shown here will
appear.
fig.3-9_35
9
From the Edit menu, select OMS MIDI
Setup .
In the OMS MIDI Setup dialog box that
appears, check Run MIDI in
background , and click [OK] .
fig.3-10_40
10
From the File menu, choose Make
Current .
* If you are unable to select Make
Current , it has already been applied,
and you may continue to the next step.
11
Verify that MIDI transmission and reception can be performed correctly.
From the
Studio menu, choose Test Studio .
fig.OMS3
12
Try playing the keyboard of the PC-
50. If the arrow beside number
1 in the
diagram at right blinks, the settings
have been made correctly.
When you move the mouse cursor
near the MIDI connector icon, the
cursor will change to a
shape.
If a MIDI sound module is connected
to the PC-50’s MIDI OUT connector,
click the MIDI connector icon shown
in the diagram at the right. If you hear
sound, the settings have been made
correctly.
A diamond mark ( ) indicated the settings are enabled.
For details on the PC-50’s
output devices, refer to
“Input / output devices”
(p. 36).
PC-50_e.book 33 ページ ２００５年１１月１０日 木曜日 午前１０時３３分