Powerplus POWX0782 MITRE SAW +UPPER TABLE 1800W 254MM EN - Manual (Page 20)

POWX0782
EN
Copyright © 2013 VARO P a g e | 20 www.varo.com
 Adapt the support arm until the saw blade is located precisely at an angle of 90°/45° in
relation to the turntable.
 Retighten the left-hand/right-hand screw (N1).
 After loosening the screw (N4), adapt the position of the indicator (N3) until the value that
is indicated corresponds to the currently preset stop position of the support arm.
10.3.4 Adapting the sawing depth stop (Fig. 30)
The sawing depth stop limits the depth to which the saw extends in the saw blade opening.
The saw depth stop must be adapted, if the saw blade makes contact with the table.
 Loosen the attachment screw (O1) of the saw depth stop.
 Adapt the saw depth stop in such a way that the saw blade extends up to the mitre and
depth guide in the saw blade opening.
 Retighten the attachment screws of the saw depth stop.
 Lower the saw head until it is stopped by the saw depth stop, and check whether the saw
blade can freely rotate in this position.
10.4 Cleaning
Use a brush, a dust cloth or vacuum cleaner, to remove all wood chips and sawdust from:
* The adjustment facilities
* The operating components
* The motor ventilation openings
* The space under the table gap.
10.5 Storage
HAZARD!
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don’t keep it in plastic bags to avoid humidity build-up.
11 TECHNICAL DATA
Mains voltage 220-240 V ~ 50Hz
Power 1800 W
Saw blade rpm 5000 min
-1
Saw blade dimensions 254 x 30 x 3 mm - 60T TCT
Cutting capacity :
As Table saw : 46 mm
As mitre saw :
0x90° H70xW110mm
45°x90° H40xW110mm
0°x45° H70xW70mm
45°(L)x45°
45°(R)x45° H35xW60mm
H40xW90mm
Machine dimensions: 700x585x420mm
Protection class (IP) 20