beautypg.com

4warnings, 5operation – Powerplus POWLI422 LED TORCH 3W + 6W EN User Manual

Page 2

background image

POWLI422

EN

Copyright © 2014 VARO

P a g e

| 2

www.varo.com

In accordance with essential applicable safety standards of European
directives

4

WARNINGS

Do not use if any parts are broken, bent, cracked or damaged. Any work light that
appears damaged in any way or operates abnormally must be removed from service
immediately. Inspect before each use.

This work light is not to be used by children. Keep out of reach of children.

Do not leave work light on and unattended.

Do not expose to fire or high temperatures; the battery may explode.

Do not charge or use near open flames or glowing embers.

Do not shine directly into eyes.

Never block lens and reflector during operation.

Do not store the work light for an extended period of time. Charge the battery every
three months during storage.

Do not charge the battery for an extended period of time. Overcharging will greatly
shorten battery life.

You must give the work light battery a top-up charge at the time of purchase.

Avoid charging at temperatures below 4

℃.

The DC charging plug may very warm when in use. Unplug from receptacle with
caution.

5

OPERATION

5.1 Magnetic base
The work light features a magnetic base on the bottom, allowing the light to be
magnetically attached to a vehicle or other metal objects.

NOTE Do not place the light on or near computer equipment,
computer disks or other types of magnetic storage equipment as
strong magnetic fields can erase or corrupt data.

5.2 Different modes

On the back of the light, there are 2 ON/OFF switches to control the light.

Press the top switch to turn 3W LED torch head on and press again to turn off.

Press the bottom switch to turn the 12LED floodlight on in low light mode. Press
again to turn into high light mode. Press a tird time to switch back off.

NOTE: This work-light has a charge and discharge protection, so in
order to better protection for battery life, it suggests that don't make
the product into a state of charge for a long time or discharge
completely exhausted.