Powerplus POWLI211 LED FLOODLIGHT 3W +S ENSOR EN - Manual

POWLI211 EN
Copyright © 2014 VARO P a g e | 1 www.varo.com
LED FLOODLIGHT WITH SENSOR 3W
POWLI211
1 DOMAIN OF USE
This outdoor lighting with a passive infra-red motion detector is the ideal outdoors security
system for your house, office, warehouse, garage, etc. It is equipped with the most
advanced passive infra-red technology to detect the heat radiation of people, animals, and
cars within a range of approximately 10 meters. In case of any movement the lamp will go
on. The period the lamp burns can be adjusted to anywhere from 5 seconds to 12 minutes.
A built-in semi darkness switch, turns off the motion sensor during those hours in order to
save energy. This also prolongs the product life of the lamp. This LED floodlight is suited
as security illumination as well as offering comfort: desired visitors will automatically
receive illumination when necessary.
WARNING! For your own safety, read this manual and the general
safety instructions carefully before using the appliance. Your LED
floodlight should only be given to other users together with these
instructions.
2 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read the manual before using the machine
In accordance with essential applicable safety standards of European
directives
3 WARNING
 Do not install when it is raining.
 Be sure to switch off power source before installing.

Make sure that the power wiring comes from circuit with an external 16A miniature
circuit breaker for the short circuit protection or a suitable fuse.
 In case of problems during the installation of the detector, contact an authorised
expert - this product must be connected to a 220V - 240 VAC, 50 Hz power source.
 Immediately replace the cracked or broken protective glass; always use original parts
for this.
4 MOUNTING THE LED FLOODLIGHT (FIG. 1)

Exclusively suited for fixed mounting.