Powerplus POWLI220 LED FLOODLIGHT 10W EN - Manual

POWLI220 EN
Copyright © 2014 VARO P a g e | 1 www.varo.com
LED FLOODLIGHT 10W
POWLI220
1 DOMAIN OF USE
Outdoor or indoor usage such as jobsite, garden, studio and workshop.
WARNING! Read this manual and general safety instructions
carefully before using the appliance, for your own safety. Your
power tool should only be passed on together with these
instructions.
2 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read the manual before using the machine
In accordance with essential applicable safety standards of European
directives
3 WARNING
 The floodlight may not be attached against a mast (pole). Best installed onto a fence
or a wall, in a warehouse, shop or a similar place.
 Replace the protection glass immediatelyif damaged.
4 ASSEMBLY
4.1 Assemblying the floodlight

Turn off the main circuit breaker.
 Attach this light with two screws of max. 4mm.
4.2 Wiring diagram

For mounting use a connection supply cable with N = blue, earth = green/yellow and
L = brown and connect as shown in fig 3. Srew the barrel nut of the srew cap so that
the packing tightens. The packing can be adjusted to a cable diameter of 8-11mm.

For adding a switch consult fig 4
4.3 Mounting

Check the correct way of mounting in fig 1.
 Check the safety distance between the body and inflammable surface when wall or
corner mounted in fig. 2.
5 USING THE FLOODLIGHT
 Turn the power back on.