Powerplus POWLI123 PORTABLE ENERGY SAVING FLOODLGHT 32W EN - Manual

POWLI123 EN
Copyright © 2015 VARO P a g e | 1 www.varo.com
PORTABLE ENERGY-SAVING FLOODLIGHT 32W
POWLI123
1 DOMAIN OF USAGE
Outdoor or indoor usage such as jobsite, garden, studio and workshop.
WARNING! Read this manual and general safety instructions
carefully before using the appliance, for your own safety. Your
power tool should only be passed on together with these
instructions.
2 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read the manual before using the machine
In accordance with essential applicable safety standards of European
directives
3 WARNING

Never attempt to change wire connection way as this has been fixed professionally.

The lighting fixture shall be fixed on stand vertically that the longitudinal axis does not
slant than ±4°from the ground plate.
 Disconnect the plug (all-poles) from the network when the front glass is open, and
follow the instructions to the next step
 Replace before using the shielding glass if it is damaged.
 If the external flexible cable or cord of this luminary is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazard.
4 ASSEMBLYING LAMP ONTO THE STAND
 First unscrew the black wing-nut (C).
 Slide the G-shaped tubular base (D) into black metal clamp at base of the lamp.
Assemble with the wing-nut through the slot in the black metal clamp.
 By loosening the wing-nut (C), you can tilt the lamp into the desired angle.

Lock the lamp in place by tightening the wing-nut.
5 USING THE FLOODLIGHT
 Simply plug in the cable (E) of the floodlight to the socket.
6 FIXING AND CHANGING AN ENERGY-SAVING LAMP
 Switch off lamp before installing the bulb.
 Remove screw (A) on top of the lamp and open the cover.

Push the bulb (B) in between the two prongs. Make sure the prongs are centred on
the metal tips of the bulb, not the ceramic casing.