Powerplus POWLI013 PORTABLE HALOG EN FLOODLIGHT 150W EN User Manual
2symbols, 3warning, 4assemblying lamp onto the stand
POWLI013
EN
Copyright © 2014 VARO
P a g e
| 1
www.varo.com
PORTABLE HALOGEN FLOODLIGHT 150W
POWLI013
1
DOMAIN OF USAGE
Outdoor or indoor usage such as jobsite, garden, studio and workshop.
WARNING! Read this manual and general safety instructions
carefully before using the appliance, for your own safety. Your
power tool should only be passed on together with these
instructions.
2
SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read the manual before using the machine
In accordance with essential applicable safety standards of European
directives
3
WARNING
Never attempt to change wire connection way as this has been fixed professionally.
The lighting fixture shall be fixed on stand vertically that the longitudinal axis does not
slant than ±4°from the ground plate.
Disconnect the plug (all-poles) from the network when the front glass is open, and
follow the instructions to the next step
Do not put the lamp any closer than 0.8 m to any object.
Replace before using the shielding glass if it is damaged.
If the external flexible cable or cord of this luminary is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazard.
4
ASSEMBLYING LAMP ONTO THE STAND
First unscrew the black wing-nut (C).
Slide the G-shaped tubular base (D) into black metal clamp at base of the lamp.
Assemble with the wing-nut through the slot in the black metal clamp.
By loosening the wing-nut (C), you can tilt the lamp into the desired angle.
Lock the lamp in place by tightening the wing-nut.