Powerplus POWLI230 LED FLOODLIGHT 20W EN User Manual
Powerplus Lighting
POWLI230
EN
Copyright © 2014 VARO
P a g e
| 1
www.varo.com
LED FLOODLIGHT 20W
POWLI230
1
DOMAIN OF USE
Outdoor or indoor usage such as jobsite, garden, studio and workshop.
WARNING! Read this manual and general safety instructions
carefully before using the appliance, for your own safety. Your
power tool should only be passed on together with these
instructions.
2
SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read the manual before using the machine
In accordance with essential applicable safety standards of European
directives
3
WARNING
The floodlight may not be attached against a mast (pole). Best installed onto a fence
or a wall, in a warehouse, shop or a similar place.
Replace the protection glass immediately if damaged.
4
ASSEMBLY
4.1 Assemblying the floodlight
Turn off the main circuit breaker.
Attach this light with two screws of max. 4mm.
4.2 Wiring diagram
For mounting use a connection supply cable with N = blue, earth = green/yellow and
L = brown and connect as shown in fig 3. Srew the barrel nut of the srew cap so that
the packing tightens. The packing can be adjusted to a cable diameter of 8-11mm.
For adding a switch consult fig 4
4.3 Mounting
Check the correct way of mounting in fig 1.
Check the safety distance between the body and inflammable surface when wall or
corner mounted in fig. 2.
5
USING THE FLOODLIGHT
Turn the power back on.