Powerplus POWAIR0014 PNEUMATIC SANDBLASTING GUN EN - Manual (Page 3)

POWAIR0014 EN
Copyright © 2014 VARO P a g e | 3 www.varo.com
PNEUMATIC SAND BLASTER SET
POWAIR0014
1 APPLIANCE
This pneumatic sand blaster is an air-powered spraying tool. It is suitable for removal of
rust and paint residue from small and poorly accessible metal and wood surfaces. In
addition, the sand blasting is used to obtain an adhesive substrate for subsequent coatings.
The grit material is drawn through the riser and sprayed by means of the supplied
compressed air. The release of the material is carried out by a trigger mechanism that
manually controls the valve fitted in the tool.
The tool may only be powered by a suitable compressed air supply. Any other or additional
use is deemed to be improper. Proper use includes the observance of the operating,
installation and maintenance instructions.
WARNING! For your own safety, read this manual and general safety
instructions carefully before using the appliance. Your power tool should
only be passed on together with these instructions.
1.1 Safety of the user
To prevent unintended and uncontrolled operation, the trigger is designed in such a way
that, when released, it immediately flips back into the OFF position. The operation will stop
immediately.
Please note that the grit material may continue to run from the container until the pressure
reduction is completed. Do not aim the jet at people. Never aim the jet at yourself or other
people or animals.
Follow all safety instructions for the proper handling of the blast media. Read and follow all
safety and operating instructions of the manufacturer for the proper handling of the blast
media. Never use quartz sand for the sand blasting.
1.2 Prohibited applications
Do not use the tool in an explosive environment that contains substances such as
flammable liquids, gases and especially paint and dust fumes. These substances may be
ignited by contact with hot surfaces of the tool.
2 DESCRIPTION (FIG. A)
1. Handle
2. Collection bag for blast media
3. Outlet nozzle
4. Trigger
5. Threaded nipple, 1/4" outside thread
6. Container for blast media
3 PACKAGE CONTENT LIST
 Remove all packaging materials.

Remove remaining packing and package inserts (if included).

Check that the package contents are complete.
 Check the appliance, the power cord, the power plug and all accessories for
transportation damage.