Edimax Technology BR-6218Mg - Manual (Page 55)

Chapter 4
Tool
This page includes the basic configuration tools, such as Configuration Tools (save or restore configuration
settings), Firmware Upgrade (upgrade system firmware) and Reset.
Parameter Description
Firmware Version This shows your current firmware version.
Firmware Upgrade
This tool allows you to upgrade the Broadband router’s system firmware. To
upgrade the firmware of your Broadband router, you need to download the
firmware file to your local hard disk, and enter that file name and path in the
appropriate field on this page. You can also use the Browse button to find the
firmware file on your PC.
Factory Default
You can use the "Factory Defaults" tool to force the Broadband router to
perform a power reset and restore the original factory settings.
System Restart
In the event that the system stops responding correctly or in some way stops
functioning, you can perform a reset. Your settings will not be changed. To
perform the reset, click on the System Restart button. You will be asked to
confirm your decision. The reset will be complete when the power light stops
blinking. Once the reset process is complete you may start using the router
again.
Select one of the above three Tools Settings selection and proceed to the manual’s relevant sub-section
54