Edimax Technology BR-6218Mg - Manual (Page 25)

2.2.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP should provide
all the information required in this section. (See chapter 1 “PPTP” for more detail)
2.2.5 L2TP
Select L2TP if your ISP requires the L2TP protocol to connect you to the Internet. Your ISP should provide
all the information required in this section. (See chapter 1 “L2TP” for more detail)
2.2.6 DDNS
DDNS allows you to map the static domain name to a dynamic IP address. You must get an account,
password and your static domain name from the DDNS service providers. This router supports DynDNS,
TZO and other common DDNS service providers.
Parameter Description
Service Type Select a DDNS service provider or select Disabled to disable DDNS function.
Username The account that your DDNS service provider assigned to you
Password The password you set for the DDNS service account above
Host Name Your static domain name that use DDNS
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other
advance sections or start using the router (with the advance settings in place)
24