Casio SE-S6000 - Manual (Page 117)

116 E
Advanced Operations
*1 Zero totalled departments / functions (the amount and item numbers are both zero) are not printed.
*2 These items can be skipped by programming.
To print a selected read / reset / periodic report on the display
Instead of entering code to issue a report, you can select an appropriate report name shown on the display and issue
it.
1. Turn the mode key to X or Z or X2/Z2 mode.
2. Select report you want to get by the key.
In X mode, you can select Daily sales, PLU, group, hourly, monthly, open check, Flash and EJ report.
In Z mode, you can select Daily sales, PLU, group, hourly, monthly, open check and EJ report and EJ clear.
In X2/Z2 mode, you can select periodic1 read / reset and periodic2 read / rese report.
3. Press to print report.
ZZ1 DEPT 0001
0001115
DEPT01 38
8.13%
•257.53
DISCOUNT •5.80
DEPT02 183
•1,362.26
DISCOUNT
•17.22
------------------------
TL 88.61
•1,916.10
DISCOUNT
•9.50
------------------------
ZZ1 CASHIER
0001
0001117
C01 ...............1
GROSS 421.25
•2,872.28
NET No 111
•1,845.35
CAID •1,057.14
CHID •139.04
RF No
1
•1.00
CLEAR No
5
•4.43
C02 ...............1
— Department report title / reset counter
— Report code
— Department Name / No. of items *1
— Sales ratio / amount *1
— Discount amount *1
— Total No. of items
— Total amount
— Discount amount total
— Clerk report title / reset counter
— Report code
— Clerk name / drawer No.
— Gross total
— Net total
— Cash in drawer
— Refund mode
— Clear key count
— Clerk name / drawer No.
X mode Z mode X2/Z2 mode
X NEXT:RC
DAILY X
~00
RPT
AMOUNT
T1 T2 T3 T4 TOTAL CHANGE R-OFF
XZ NEXT:RC
PERIODIC 1X
~00
RPT
AMOUNT
T1 T2 T3 T4 TOTAL CHANGE R-OFF
Z NEXT:RC
DAILY Z
~00
RPT
AMOUNT
T1 T2 T3 T4 TOTAL CHANGE R-OFF