Casio QV-5700 3 - Manual (Page 19)

CONNECTING TO EXTERNAL EQUIPMENT
137
CONNECTING TO EXTERNAL EQUIPMENT
Your camera has three terminals for connection to external
equipment: a VIDEO OUT terminal, a DIGITAL terminal (re-
mote shutter release terminal), and a USB port. You can use
these terminals to connect the camera to a television, VCR,
computer, or other external equipment. See page 103 for in-
formation about the DIGITAL port (remote shutter release
terminal).
IMPORTANT!
• Be sure to turn off both the camera and the other
equipment before making any connections.
• Check the documentation that comes with your other
equipment for information you may need to know
when making connections.
• Leaving the same image displayed on a television or
computer display screen for very long periods can
cause the image to be “burned in” on the screen.
When this happens, a faint after-image remains on the
screen, even after you disconnect the camera. To
avoid this, you should not leave the same image dis-
played on such a screen for very long periods.
• This camera does not support cable transfer of data
with other CASIO digital cameras, portable tele-
phones, etc.
Connecting to a Television
Images being displayed on the camera’s monitor screen,
whether for recording or playback, can also be displayed on
the screen of a connected television. Connect the camera to
a TV as illustrated below.
INPUT
VIDEO L R
AUDIO
TV
VIDEO OUT
terminal
Special video cable
(bundled with
camera.)
VIDEO IN
terminal