Emerson 5081-T - Manual (Page 65)

MODEL 5081-T SECTION 9.0
OPERATION WITH MODEL 375
SECTION 9.0
OPERATION WITH MODEL 375
9.1 Note on Model 375 or 275 Communicator
The Model 375 or 275 Communicator is a product of Emerson Process Management, Rosemount Inc. This section
contains selected information on using the Model 375 or 275 with the Rosemount Analytical Model 5081-T-HT
Transmitter. For complete information on the Model 375 or 275 Communicator, see the Model 375 or 275 instruc-
tion manual. For technical support on the Model 375 or 275 Communicator, call Emerson Process Management at
(800) 999-9307 within the United States. Support is available worldwide on the internet at http://rosemount.com.
Note: Model 275 Communicator does not support F OUNDATION Fieldbus on Model 5081-T-FF.
9.2 Connecting the Communicator
Figure 9-1 shows how the Model 275 or 375 Communicator connects to
the output lines from the Model 5081-T-HT Transmitter.
CAUTION
For intrinsically safe CSA and FM
wiring connections, see the Model
375 instruction manual.
FIGURE 9-1. Connecting the HART Communicator
4-20 mA + Digital
250
ohm
Control System
Computer
Model 5081-T
Conductivity
Transmitter
Bridge
Model 375
or 275
Communicator
(“Configurator”)
59