Everpure 2001 - Manual (Page 16)

SUPREMA 2001 - OPERATION & SERVICE MANUAL
Page 16 of 60 July 6, 2001 Suprema 2001 - Operation & Service
SET-UP MODE & ACCESS CODE
After scrolling past all of the counters, an access code is required to get into the "
SET -
UP
" section of the software. This section allows changes to be made to the computer
programming. The procedures are outlined below.
1. Enter the factory pre-set access code.
a) Factory pre-set access code - press the following in the sequence outlined
below;
1 COFFEE
2 50/50
3 DECAF
4 HOT
WATER
b) The message on the display will now read,
2. The " SET - UP " mode has now been accessed, and changes can be made.
a) The following is the sequence of the settings that appear when you scroll
through the "
SET - UP
" mode. Please note that there are some differences
between the Regular software version and the APP software version.
Suprema Model Type REG APP
PRODUCT ON/OFF ●
SET PRODUCT ● ●
SET WATER ● ●
SET PRICE ● ●
ENABLE SWITCHES ● ●
SET DEFAULT ● ●
SET TOP PAUSE ● ●
SET BOTTOM PAUSE ● ●
MAXIMUM CUPS FOR CARAFE ● ●
FREQUENCY OF MESSAGES ●
SERVICE COUNTER ●
BOTTOM PAUSE DELAY ● ●
MESSAGES ON / OFF ● ●
FREE VEND KEY SWITCH ● ●
SET GROUNDS CONT. ●
CHOCO PUMP CYCLES ● ●
DOUBLE-CUP SET-UP ● ●
SET TEMPERATURE ● ●
CUSTOM MESSAGES ●
LANGUAGE ●
SET WATER LEVEL ● ●
SET POWDER MIX ●
SET POWDER BEV. ●
WATER MAX. BREWER ●
LOCK COUNTERS ●
FORCE VEND ● ●
● Available Feature
PRODUCT ON/OFF
PRESS
$ Tip:
To bypass the
counters and go
directly to the
access code menu,
press the hidden
“
DOWN” menu
scroll button, after
pressing the “
SET -
UP ” button.