Auriol Z32171 - Manual (Page 27)

27 GB
manually activate reception of the signal. To do so, press and hold the
CH button
17 for three seconds until the channel symbol flashes.
Following successful reception the animation of the symbol will disappear
and the transmitted temperature and humidity will appear in the display.
Background lighting
Touch the SNOOZE-/LIGHT field 2 . The backlight illuminates for
5 seconds.
Troubleshooting
The device contains delicate electronic components. Thus radio transmitting
equipment in the immediate vicinity may interfere with the appliance. If the
display shows interference, move such objects away from the weather station.
Electrostatic discharges can lead to malfunctions.
In cases of the appliance failing to work, remove the batteries for a short
while and then replace them.
Obstacles, e.g. concrete walls, may make the reception susceptible to in-
terference. In this event change the location. Please note, the outdoor
sensor should always be set up within a range of max. 100 metres (open
area) of the base station. The specified range is the open area range,
meaning there should be no obstructions between the outdoor sensor
and the base. „Visual contact“ between the outdoor sensor and the base
will often improve transmission.
Cold (outdoor temperatures below 0 °C) may also negatively impact
battery performance of the outdoor sensor, thus wireless transmission.
Another factor which may interfere with reception is drained or weak bat-
teries in the outdoor sensor. Replace these with fresh batteries.
If the weather station is not working properly, briefly remove and reinsert
the batteries.