Auriol Z32171 User Manual

Page 25

Setting the alarm

Press and hold the ALARM-/SET button

for 3 seconds to enter the

alarm settings mode. The last alarm setting will appear in place of
the clock, with the hour flashing. The mark A1 will appear to the
right of the alarm time.

Set the hour for alarm A1 using the UP button

or the

DOWN- / -button

TIP: Press and hold the UP button or the DOWN- / -button to
quickly scan ahead or back.

Press the ALARM-/SET button again to confirm your entry, and he

minutes will start flashing. These can be changed in the same manner.

Activating the alarm

In clock mode press the DOWN- / -button

. In addition to the

time a bell will appear with 1: . Alarm 1 is now activated. Press
the DOWN- / -button again and the alarm symbol 1 will disappear.
Alarm symbol 2: .will appear. Pressing the DOWN- / -button
again will activate alarm 1 and alarm 2. Both alarm symbols will ap-
pear:

Pressing the DOWN- / -button a fourth time will deactivate both
alarm 1 and alarm 2.

Switching off the alarm

The alarm will sound at the set time and the backlight will switch on.

When not switched off, the alarm will sound for 2 minutes before
stopping automatically.

Press the SNOOZE-/LIGHT field

to interrupt the alarm. The clock

display will flash

, indicating the snooze function has

been activated: the alarm will sound again after 5 minutes.

Press any button on the keypad to actually shut off the alarm.

This manual is related to the following products:

Z31601A_B