Auriol Z32171 - Manual (Page 14)

14 GB
The base station as well as the outdoor sensor can be hung by the
eyebolt 4 or 10 . Or flip out the stand 6 or 11 on either device to
place the device on a horizontal, level surface.
Starting the outdoor sensor /
changing batteries
Open the battery compartment 12 on the back of the outdoor
sensor by sliding the battery cover 9 in the direction of the arrow.
When changing batteries first remove the old batteries.
Insert the new batteries, type LR06, in the battery compartment
12 .
Check the polarity of the battery during insertion. This is indicated in
the battery compartment.
Close the battery cover.
The signal LED 8 at the front of the outdoor sensor will briefly light
up. The signal LED will then flash about twice a minute, indicating
wireless transmission.
Starting the base station / changing batteries
Open the battery cover 5 at the back of the base station by pulling
up on the tab at the bottom of the battery compartment.
When changing batteries first remove the old batteries.
Insert the new batteries, type LR06, in the battery compartment
7 .
Check the polarity of the battery during insertion. This is indicated in
the battery compartment.
Close the battery cover.
The display 1 will briefly light up and run a brief check of all dis-
play elements.