Auriol Z32171 - Manual (Page 24)

24 GB
Activating the temperature alarm
Press and hold the ALERT button 18 for three seconds until the tem-
perature display flashes in the outdoor temperature field 24 . A
flashing up arrow ▲ will appear to the left of the temperature.
Now press the UP button 14 or the DOWN- / -button 15 to set the
maximum temperature for the desired temperature range.
TIP: Press and hold the UP button or the DOWN- / -button to
quickly scan ahead or back through the numbers.
Confirm the value by pressing the ALERT button. The temperature
display will now flash again and a down arrow ▼ will start flashing.
Press the UP button or the DOWN- / -button to now set the minimum
temperature for the desired temperature range.
Confirm the value by pressing the ALERT button.
The temperature range is now set.
Briefly press the ALERT button to now activate or deactivate the tem-
perature alarm.
With the temperature alarm activated a static double arrow will ap-
pear in the outdoor temperature field below OUT:
If the outdoor sensor measures a temperature outside this tempera-
ture range the base station will sound an alarm for one minute. This
alarm can be silenced by pressing any button on the keypad.
The temperature which triggered the alarm will flash as a visual alarm,
and the part of the double arrow indicating the direction of the tem-
perature deviation. Press the ALERT button to switch off the alarm.
Alarm
The weather station features two alarms, which can be set and activated
separately.