Auriol Z32171 - Manual (Page 26)

26 GB
Accessing stored data
Maximum temperatures
Press the MEM button again and both temperature fields will show
23
and 24 next to the temperature, and MAX next to the humidity. The re-
spective maximum indoor and outdoor value will be shown. Press the
MEM button twice and MIN will appear next to the temperature, and
the respective lowest indoor and outdoor value will be shown. After 5
seconds the current values will again be displayed.
Barometric pressure history
Repeatedly briefly pressing the SET-/HISTORY button will display the bar-
ometric pressure for the past 12 hours. The barometric pressure field
22
next to the display of the barometric pressure the history indicates how
many hours ago the barometric pressure being displayed was current.
Manually activating signal reception
Activating DCF signal reception
Every night the base station synchronises the internal clock with the DCF
signal. However, you may also activate DCF reception manually. To do
so, press and hold the DOWN- / -button
15 for 3 seconds until the ra-
dio tower symbol flashes. Following successful reception the radio
tower symbol will be static. If reception fails, the radio tower symbol will
disappear.
Activating reception from the outdoor sensor
The outdoor sensor will transmit a signal about twice a minute, which is
automatically received by the base station. However, you may also