Curtis TRCD688 - Manual (Page 9)

Operation
Now your CD micro system is installed and ready for use,
please refer to the following instructions for correct operation
AC Power Operation
The CD micro system will be in standby mode, when the AC
power supply is connected and switched on .
At the front of the CD micro system or using the remote
control, press POWER to switch the CD micro system on .The
LCD display will light up.
Volume Control
WARNING
Do not turn off the CD micro system when the volume is set at
high level. When it is subsequent turned on, a sudden blast of
sound may damage your hearing and the external speakers.
The volume level can be adjusted either using the controls on
the unit or by the remote control.
On the unit turn the volume control towards the sign to
increase the volume and to wards the sign to reduce the
volume. The volume level will be displayed while adjustments are
being made.
To adjust the volume level using the remote control, press the
VOLUME / buttons.
Press MUTE on either the unit or the remote control to mute
the sound. Press MUTE again to resume sound.
Note: Pressing any of the volume control buttons will also
resume sound.
P.EQ
This system has a 3 -Band Preset Electronic Equaliser that
allows you to adjust the tone output for the most popular types
of music. The settings are
CLASSIC , ROCK , POP .
To change to EQ setting, press the EQ button on the front
panel or on the remote control until the desired setting appears
in the main display.
8