Curtis TRCD688 - Manual (Page 6)

Getting Started
Unpacking your TRCD688 Micro System
Carefully remove your CD micro system from its packaging .You
may wish to store the packaging for future use.
Box Contents:
Front View
Plug the power cord into an AC outlet having 120V/60Hz only.
Connecting this unit to other power sources may damage the
unit.
NOTES:
*The AC polarized plug is to help to minimize the possibility of
electric shock. If the polarized plug dies not fit into a
nonpolarized AC outlet , to not file or cut the wide blade; it is
the user s responsibility to have an electrician replace the
obsolete outlet.
*The power cord should be unplugged from the outlet when the
unit is not going to be used for a long period of time.
Installation
Speaker Connection
1. Unwind the cable from each speaker.
2. At the rear of the CD micro system there are two speaker
sockets.
3. Plug the speaker located on the right into the socket marked
R and coloured red.
4. Plug the speaker located on the left into the socket marked
L and coloured white.
5. For optimal stereo effect, place the speakers approximately
1.5m apart.
CD micro system
2 speakers (speaker cables attached)
Remote control
AM Loop Antenna
User Guide
5