Curtis TRCD688 - Manual (Page 13)

Please Note:
Playing a CD
On CD micro system or remote control:
1. Press the PLAY/PAUSE BUTTON. The display will show the
track number and the elapsed playing time.
2. To pause playback, press the PLAY/PAUSE button. The
elapsed time will flash.
3. To resume playback press PLAY/PAUSE again.
4. To stop playback, press either BAND/STOP on the remote
control or on the unit.
Track Selection
Using the remote control:
1. Press either the or buttons to select the desired track
number.
2. Press PLAY/PAUSE, to start playing.
Using the unit controls:
1. Press either of the or buttons to select the desired
track number.
Track Selection During Play
Using the remote control:
1. During play, press either of the or buttons to select the
desired track number. The selected track will automatically
start to play.
Do not place foreign objects into the CD compartment , this
may damage the mechanism.
Always keep the CD door shut, to prevent dust or dirt from
getting into CD mechanism.
Never place more than one CD into the CD compartment at
any time.
After CD door is closed,CD information may not appear on the
LCD display, this means the CD cannot be read by the CD mech-
anism. Refer to the Care and maintenance section.
12