Curtis TRCD688 - Manual (Page 15)

Using the unit controls:
1. At stop mode press PROG/MEM, MEMORY will flash on the
display, the track number is shown on the left and the program
number on the right as above.
2. Use the or buttons to select the desired track number
to be played back first.
3. Press PROG/MEM. The display will increment the program
playback number.
4. Use the or buttons to select the track number to be
played back second in the programmed sequence.
5. Press the PROG/MEM button.
6. Repeat this process until you have entered all of the tracks
you wish to play back in the programmed sequence.
7. Press PLAY/PAUSE to start playback. Play back will start
with first track selected.
8. To stop playback, press the STOP/BAND button.
9. Opening the CD door will clear program.
Random Play
1. With the CD loaded, press RANDOM on the remote control.
The tracks will be played in a random order.
2. To cancel random play either press RANDOM or BAND/
STOP on the remote control, or STOP/BAND on the unit.
Repeat Play
1. Press the M-UP/REPEAT on either the remote control or the
unit once, to repeat playback of the same track. The REPEAT
indicator will flash on the display.
2. To repeat all tracks, press M-UP/REPEAT twice. The
REPEAT indicator will stop flashing and remain on.
3. To cancel, press M-UP/REPEAT on the unit until the REPEAT
indicator extinguishes.
14