EVGA nForce 122-YW-E173 - Manual (Page 61)

EVGA 53
FSB & Memory Config
Select
FSB & Memory Config
from the Frequency/Voltage Control menu and
press Enter to display the FSB & Memory Config menu. This menu provides the
means to set System Memory settings, FSB, and timings that correspond with
system adjustments.
Figure 14. FSB & Memory Config Menu
‰ FSB - Memory Clock Mode
Use the
Page Up and Page Down keys to scroll through the FSB and Memory
Clock Mode options. The options are:
¾ Auto
This is the optimal setting since it sets the FSB and memory speeds
automatically.
¾ Linked
When Link is selected,
FSB (QDR), MHz
is changed to editable and the
FSB speed can be entered manually. As the FSB speed is changed,
CPU
Freq, MHz
changes proportionally.
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7:Defaults
Parameters Settings Current Val u e
Current CPU Freq, MHz 2933.3 2933.3
CPU Multiplier 11X 11X
FSB – Memory Clock Mode [Auto]
X FSB – Memory Ratio Auto
x FSB (QDR), MHz
Auto 1066.7
Actual FSB (QDR), MHz 1066.7
x MEM (DDR), MHz
Auto 800.6
Actual MEM (DDR), MHz 800.0
` Memory Timing Setting [Press Enter]
Item Help
Main Level
`
System clock mode
[Auto]
Set FSB and memory
speed automatically.
[Linked]
Enter FSB Speed
manually. Memory Speed
changes
Proportionally.
[Unlinked]
Enter FSB and memory
speed manually.
Phoenix – AwardBIOS CMOS Setup Utility
FSB & Memory Config