EVGA nForce 122-YW-E173 - Manual (Page 59)

EVGA 51
Frequency/Voltage Control
Select
Frequency/Voltage Control
from the CMOS Setup Utility menu.
Press Enter to display the functions of the Frequency/Voltage Control menu.
Figure 13. Frequency/Voltage Control
‰ CPU Clock Ratio Unlock
This value is set by the CPU Multiplier when
[Disable]
. If set
to
[Enabled]
, the option to manually set the CPU Multiplier can be
selectable.
‰ LDT Frequency
This option can be changed from 5x to 1x.
‰ CPU N/2 Ratio
This option will only appear if a 45nm CPU is in use. This option, if
[Enabled]
will add a .5 to the multiplier. Ex: 9.5x
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7:Defaults
` System Clocks
[ Press Enter ]
` FSB & Memory Config
[Press Enter]
` System Voltages
[Press Enter]
CPU Clock Ratio Unlock [Disabled]
x CPU Clock Ratio 9 X
LDT Frequency [5x]
Load timing/voltage set [Press Enter]
Save timing/voltage set [Press Enter]
Item Help
Main Level `
Phoenix – AwardBIOS CMOS Setup Utility
Frequency/Voltage Control