EVGA nForce 122-YW-E173 - Manual (Page 42)

EVGA 34
CPU Feature
Select
CPU Feature
from the Advanced Chipset Features menu and press Enter
to display the CPU Configuration menu.
Figure 8. CPU Feature Menu
‰ Thermal Management
Use this function to enable or disable TM1 and TM2 support. Options are:
¾ Disable
Disable support for TM1 and TM2.
¾ TM1 Only
The CPU is thermally throttled by cutting active processor clock cycles.
¾ TM2 Only
Thermal throttling is achieved by reducing the CPU multiplier and CPU
core voltage.
¾ TM1 & TM2
Enables support for both TM1 and TM2.
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7:Defaults
Thermal Management [ Disabled ]
Intel SpeedStep [Disabled]
X PPM Mode Native Mode
Limit CPUID MaxVal [Disabled]
C1E Function [Auto]
Executive Disable Bit [Enabled]
Virtualization Technology [Enabled]
CPU Core 0 Enabled
CPU Core 1 [Enabled]
x CPU Core 2
Disabled
x CPU Core 3
Disabled
Item Help
Main Level
`
Used to enable/disable
TM1 or TM2 support.
In TM1 mode, the CPU
is thermally throttled
by cutting active
processor clock cycles
.
In TM2 mode, thermal
throttling is achieved
by reducing the CPU
multiplier and CPU
core voltage.
Phoenix – AwardBIOS CMOS Setup Utility
CPU Feature