EVGA nForce 122-YW-E173 - Manual (Page 45)

EVGA 37
Boot Other Device
With the option set to Enable , the system boots from some other device if the
first/second/third boot devices fail.
Boot Up NumLock Status
This option allows you to select the power-on state of NumLock . Select
On
to
activate the keyboard NumLock when the system is started. Select
Off
to disable
the NumLock key.
Security Option
The Security Options allows you to require a password every time the system
boots or only when you enter setup. Select
Setup
to require a password to gain
access to the CMOS Setup screen. Select
System
to require a password to
access the CMOS Setup screen and when the system boots.
APIC Mode
Use this function to enable or disable the Advanced Programmable Interrupt
Controller (APIC). If you disable this option, you also disable the MPS Version
Control for OS option.
MPS Version Control For OS
Use this function to select the Multi-Processor Specification (MPS) version that
BIOS passes to the operating system. Use the
Page Up and Page Down keys to
scroll through the options.
Full Screen LOGO Show
This option allows you to enable or disable the display of the full-screen logo
when the system boots. Use the
Page Up and Page Down keys to toggle
between Enable and Disable