Elation Professional RGB Lamp - Manual (Page 24)

©Elation Professional® 24 impression™
After switching ON the system the LEDs will be operated with a Pulse Width
Modulation
(PWM) of 1200Hz.
In addition all standard setting will be loaded (DMX start address [001], Normal Mode
with 14 DMX channels).
b) 600Hz Mode (Hold down the DOWN- button during power ON)
After switching ON the system the LEDs will be operated with a Pulse Width
Modulation
(PWM) of 600Hz.
In addition all standard setting will be loaded (DMX start address [001], Normal Mode
with 14 DMX channels).
c) Standard Mode (Hold down the ENTER- button during power ON)
After switching ON the system the DMX start address will be set to [001]. All other
setting remain unchanged.
Additional Display Indication:
As a default you'll find the following additional information in the first row of the LCD display:
XX/X/XX
06 = 600Hz / 12 = 1200Hz
N = Normal Mode / C = Compressed Mode / H = High Res. Mode
N = Tilt normal / I = Tilt inverted
N = Pan normal / I = Pan inverted