FujiFilm X100 User Manual

Page 88

Using the Menus: Shooting Mode

u SELECT CUSTOM SETTING

SELECT CUSTOM SETTING

Recall settings saved with

K EDIT/SAVE CUSTOM SETTING.

K EDIT/SAVE CUSTOM SETTING

EDIT/SAVE CUSTOM SETTING

Save settings (

P 55).

v DISP. CUSTOM SETTING

DISP. CUSTOM SETTING

Choose the items displayed in the optical viewfi nder or in the electronic viewfi nder and LCD monitor (

P 20). The following items

can be displayed: framing grid (you can also select the grid type as described on page 86), virtual horizon, autofocus distance (fo-
cus distance is always displayed in manual focus mode), histogram, exposure (shutter speed, aperture, and sensitivity), exposure
compensation/exposure indicator, metering, fl ash mode, white balance, fi lm simulation, dynamic range, number of exposures
remaining, image size and quality, and battery level. See pages 6 – 7 for the locations of these items in the displays.

Highlight OVF or EVF/LCD and press MENU/OK.

Press the command dial up or down to highlight items and press MENU/OK to select or deselect. Press DISP/BACK to exit when

settings are complete.

Virtual Horizon

Selecting

Selecting ELECTRONIC LEVEL

ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines over-

displays a virtual horizon. The camera is level when the two lines over-

lap.

R The virtual horizon may not be displayed if the camera lens is pointed up or down.

This manual is related to the following products:

X100F