FujiFilm X100 User Manual
Page 21
5
Be
fore
Y
o
u
Begi
n
Parts of the Camera
The Command Control
The Command Control
Pressing the command control left or right performs the same function as pressing the command dial
left or right. It can also be used to choose a combination of shutter speed and aperture in place of the
command dial (program shift;
P 24) or to adjust aperture in increments of 1
/
3 EV (
P 26, 27).
You can also press the center of the command dial to zoom in on the focus area selected for manual
focus in the electronic viewfi nder or LCD monitor, or to zoom in on the active focus point during play-
back or (if CONTINUOUS is selected for
A IMAGE DISP. in the setup menu; P 81) image review (press
again to cancel zoom).
This manual is related to the following products: