FujiFilm X100 - Manual (Page 53)

37
M
o
re
o
n
Ph
o
to
g
ra
p
h
y
1 Press the command dial up (DRIVE)
to display drive options, then rotate
the dial or press it up or down to
highlight
I (TOP (RAW)). The options shown
below will be displayed.
TOP (RAW)
5fps 3fps
2 Press the command dial left or right to high-
light an option and press MENU/OK to select.
Option Option Description Description
5 fps 5 fps
At shutter speeds faster than 1 / 100 s, the camera
takes pictures at 5 frames per second (fps).
3 fps 3 fps
At shutter speeds faster than 1 / 10 s, the camera will
take pictures at 3 fps.
3 Press the shutter button halfway to
focus.
4 Press the shutter button the rest
of the way down to start shooting.
Shooting ends when the shutter
button is released, after ten JPEG or
eight RAW pictures have been taken, or when
memory is full.
R Focus and exposure are determined by the fi rst
frame in each series. The fl ash turns off automati-
cally; the previously-selected fl ash mode is restored
when burst shooting is turned off .
R Frame rate varies with shutter speed.
R Additional time may be required to record pictures
when shooting ends; to cancel recording and take
next pictures immediately, press DISP/BACK.
R If fi le numbering reaches 999 before shooting is
complete, the remaining pictures will be recorded
to a new folder (
P 82).
I I Continuous Shooting (Burst Mode) Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.