FujiFilm X100 - Manual (Page 114)

98
Viewing Pictures on a Computer
Connecting the Camera Connecting the Camera
1 If the pictures you wish to copy are stored on a memory card, insert the card into the camera ( P 13).
If no card is inserted, pictures will be copied from internal memory.
R Windows users may require the Windows CD when starting the software for the fi rst time.
Q Loss of power during transfer could result in loss of data or damage to internal memory or the memory
card. Insert a fresh or fully-charged battery before connecting the camera.
2 Turn the camera off and connect the supplied USB cable as
shown, making sure the connectors are fully inserted. Con-
nect the camera directly to the computer; do not use a USB
hub or keyboard.
3 Turn the camera on. MyFinePix Studio or FinePixViewer will start automatically; follow the on-screen
instructions to copy pictures to the computer. To exit without copying pictures, click Cancel.
Q If the software does not start automatically, it may not be correctly installed. Disconnect the camera and
reinstall the software.
For more information on using the supplied software, start the application and select the appropriate
option from the Help menu.