FujiFilm X100 - Manual (Page 20)

4
Parts of the Camera
The Command Dial The Command Dial
Rotate the command dial or press it up (q), right (w), down (e), or left (r) to highlight items and
press MENU/OK (t) to select.
The command dial also serves as the following buttons:
q:
b (delete) button ( P 58)/DRIVE button ( P 37)
w: N (fl ash) button ( P 32)
e: WB (white balance) button ( P 35)
r: F (macro) button ( P 34)
You can also rotate the command dial to choose a combination of shutter speed and aperture
(program shift;
P 24) or to adjust shutter speed in increments of 1 / 3 EV ( P 25, 27).
Control Lock
Control Lock
To lock the RAW button and prevent the command dial being used as a DRIVE, fl ash, white balance, or macro
button, press MENU/OK until
X is displayed. This prevents accidental operation of these controls during shooting.
The controls can be unlocked by pressing MENU/OK until X is no longer displayed.